Problem Solving:Windows NT/2000
\TOOLS\PERVASIV directory of the
copying only the remaining files or
TIMESYNC.NLM
Support Pack.
copying all the files again. Select the
After installing the Support Pack
Installing the Support Pack with the
latter option. Then, when the installa
and restarting the server, TIME
backup option, which can reverse the
tion has completed, you must copy
SYNC.NLM reports TIMESYNC: To
installation in case of problems, will
DSBACKER.NLM from NDS v8 to
set the time sources to none put a `;' by
require an additional 132 MB of disk
your server's SYSTEM directory.
itself. For example: SET TIMESYNC
space. Also, installation of the Support
TIME SOURCES=; twice on a server
Pack requires access rights to the serv
ManageWise Error
that is configured as a single server
er console.
If
the
ManageWise
module
time source. This message is irrelevant
If NLSLSP trace is turned on,
GTREND.NLM is running on the serv
on a single server time source because
NLSTRACE.DBG cannot be updated.
er, you may get an error during the
the server won't accept time from a
Unload NLSLSP and reload it with the
install
saying
cannot
open
configured source.
trace options turned off.
GT_ERR.LOG . To resolve this, switch
If you ignore the message, time is
to the server console. Unload LAN
Installation
synchronised and you never see the
ZSU.NLM and GTREND.NLM. Switch
message again unless you reload
To install the Support Pack on a
back to the install screen (NWCON
TIMESYNC.NLM. If you want to stop
single server, do the following:
FIG.NLM). Press Enter, and then select
the message from appearing every
the Retry Copying File option. The in
time you load TIMESYNC.NLM:
1
Unpack the EXE file on the server's
stallation will then proceed.
volume SYS or on another server
1
Load MONITOR.NLM on the serv
volume. Remember to do this from
BorderManager
er.
the root directory.
When trying to administer Border
2
Select Server Parameters/Select
2
At the server console prompt, type
Manager Enterprise Edition 3.0 serv
Time.
NWCONFIG.
ices on a NetWare 5 server that has
3
Enter anything in the TIMESYNC
3
Select Product Options, then Install
Support Pack 4, you may experience
Time Sources field.
A Product Not Listed.
licensing error messages if Border
4
Exit Monitor.
4
If the Support Pack files are on the
Manager Enterprise Edition 3.0 was
5
Load MONITOR.NLM.
local SYS volume, press F3, then
installed after the Support Pack. To fix
6
Select Server Parameters/Select
specify the path including the vol
this, download the BM3LICFX.EXE
Time.
ume name. For example, SYS:\
patch
from
support.novell.com/
7
Edit the TIMESYNC Time Sources
rectory name>. If the files are on a
search/ff_index.htm.
field so that it only contains a semi
different server, press F3, then
colon.
specify the full path including the
BorderManager 3.5
8
Exit MONITOR.NLM.
server name (eg, \\SERVER\
If you install BorderManager 3.5 af
VOL1:\DIRNAME). You will be
ter installing the Support Pack, an er
Future Config Changes
prompted for a login name and
ror message may appear that says
The NetWare 5 Support Pack 4 in
password for the other server.
Error extending Border Services
stallation detects the current server
5
Press Enter, then F10 to accept the
Schemas in the NDS . Do nothing this
configuration and installs the appro
marked options and continue. Note
message is not correct.
priate files. If you change the server
that if you want to be able to unin
Another problem with this configu
configuration, you will need to rein
stall the Support Pack later you
ration is that TCPIP.NLM may be cop
stall the Support Pack for the new con
must select the option to back up
ied to the server but it may have a file
figuration.
files.
size of 0 bytes. If this happens, replace
For example, if LDAP Services for
6
Press Enter to end. After the files
the TCPIP.NLM with the version
NDS is installed on a NetWare 5 server
are copied, review the .NCF files for
found on the BorderManager 3.5 CD.
before the Support Pack is installed,
accuracy.
then the Support Pack installation
7
At the server console type RESET
Driver Dates
automatically upgrades LDAP Serv
SERVER. This resets the server
When updating a server which was
ices for NDS. If LDAP Services for NDS
(warm boot) and completes the in
previously updated with NetWare 5
is installed after the Support Pack in
stallation of the Support Pack. The
Support Pack 3, a message regarding
stallation, you need to reinstall the
RESTART SERVER command will
updating newer files with older files
Support Pack to bring LDAP Services
not activate the new SERVER.EXE
may appear. The files from the pre
for NDS up to the Support Pack level.
file.
vious Support Pack had the DOS date
inadvertently changed. This has been
DSREPAIR
If Using NDS 8
corrected for future support packs.
If the NDS tree was originally in
If you're running NDS 8, after en
The files are equivalent. It makes no
stalled using NetWare 4.0 or 4.01, you
tering the source location of the Sup
difference whether you choose to up
should repair the local database. This
port Pack files you'll get an error
date or not these are the certified
operation addresses schema defini
message offering you the option of
drivers and only the date is different.
tions that might not have been prop
File: P1717.2
Issue 117 (April 2000) page 4
PC Network Advisor
< Next page >
New! The best sites for quality inkjet printer cartridges and the best sites for cheap inkjet cartridges